Home  |  About Us  |  Products  |  Services  |  FAQ’s  |  Gallery  |  Sitemap  |  Inquiry  |  Contact Us  
 
 
 
 Mortars For Acid Proof Brick /  Tile  /  Mandana Stone  
 Acid Proof Tiles  
 Acid Proof Bricks  
 Acid Proof Lining  
 Acid Proof Flooring  
 Acid Resistant Tiles  
 Acid Resistant Bricks  
 Acid Resistant Lining  
 Acid Resistant Flooring  
 Red Mandana Stone  
 Epoxy Lining  
 Epoxy Flooring  
 Epoxy Coating  
 Water Base Epoxy  
 Glass Flake Filled Lining  
 Glass Flake Lining  
 Glass Flake Coating  
 Grouts  
 Water Proofing  
 Liquid Applied Stainless Steel  316 Coating  
 P.U.Flooring  
 Water Base Polyurethane  
 Polyurethane Wall Coating  
 Polyurethane Flooring  
 Self Leveled Epoxy Flooring  Coating Linings  
 
 
 

 

 

 

  Mortars For Acid Proof Brick /  Tile /  Mandana Stone
 
 
   
A.R.PRIMER :-
°
INTRODUCTION:

All type of surface whether, it is concrete, steel or wood, and require protection against corrosive environment. To protect substriate against corrosive attack, it is recommended to apply anti-corrosive primer followed by further finish coats, screed lining or brick/tile lining. A.R.Primer is most suitable primer to protect different type of sub-striate against atmospheric corrosion and chemical corrosion.

°
AREA OF APPLICATION:

A.R.Primer can be applied on variety of sub-striate like steel, concrete, wood. To protect steel structure, tanks,pipes, girders, marine structure either exteriors or interiors. A.R.Primer is very widely used on concrete as a primer where further acid resisting brick/tile lining is recommended.

° PHYSICAL PROPERTIES:

Viscosity @ 25 C by Ford cup
B4 in Sec.
90-120
Drying time @ 25 C. 1 hr
Bonding to steel/concrete/ceramic/MS GOOD
Shelf Life (in sealed container
only)
1 yr.

°
METHOD OF APPICATION:

Concrete should be sound, properly cured for min. 28 days, damp free, even in line, free from any loose cement mortar and any loose particles, before application of A.R.Primer and any type of further acid
resisting brick/tile lining installation.

°
APPLICATION:

1. The material in the container should be properly mixed before application.

2. A.R.Primer can be applied with good quality of painting brush in a uniform thickness. Consumption of material will depends on surface condition and absorption of the concrete. Two coats recommended for best
performance. Allow 2-3 hrs. Drying time between each coat.

3. On MS surface, sand blasting is recommended for good bonding with sub-striate, follow by two coats of A.R.Primer anti-corrosive primer.

°
CHEMICAL RESISTANCE PROPERTIES::

STORAGE:
A.R.Primer should be stored in properly sealed containers away from direct sun light, heat and flame. Reseal container after use.

PACKING:
25 Lts. 200 Lts. good quality MS container.

HEALTH & SAFETY:

It is advisable to wear protective wears at the time of use of A.R.Primer and all other our products. In case of contact with eyes, clean with plenty of water and consult a doctor. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.
 
CHEMIPROTECT ENGINEERS
Contact at Works :-
Plot No. 2114, Phase III, G.I.D.C. Estate, Vatva,
Ahmedabad-(India) - 382445.
Call Us :- Works +91-79-25891689
Fax :- +91-79-25830002
E-mail us :- info@acidproofindia.com

chemiprotect@dataone.in

chemiprotect@gmail.com