We Undertake Contracts For Complete Acid Proof Flooring & Coating System Into Effluent Treatment Plant, Battery Charging Room, Acid Storage Yard, Neutralize Tank, Neutralizer Tank, Acid Collection Tank, Chemicals Reaction Vessel, Chemicals Storage Vessel, Drainage Systems, Process Floor Area,Auto Cleave vessels, Salphoneter vessels, Isolator vessels, Holding vessels, Nit reactor vessels, Mesuring Tank Etc.

Home  |  About Us  |  Products  |  Services  |  FAQ’s  |  Gallery  |  Sitemap  |  Inquiry  |  Contact Us  
 Mortars For Acid Proof Brick /  Tile  /  Mandana Stone  
 Acid Proof Tiles  
 Acid Proof Bricks  
 Acid Proof Lining  
 Acid Proof Flooring  
 Acid Resistant Tiles  
 Acid Resistant Bricks  
 Acid Resistant Lining  
 Acid Resistant Flooring  
 Red Mandana Stone  
 Epoxy Lining  
 Epoxy Flooring  
 Epoxy Coating  
 Water Base Epoxy  
 Glass Flake Filled Lining  
 Glass Flake Lining  
 Glass Flake Coating  
 Water Proofing  
 Liquid Applied Stainless Steel  316 Coating  
 Water Base Polyurethane  
 Polyurethane Wall Coating  
 Polyurethane Flooring  
 Self Leveled Epoxy Flooring  Coating Linings  




  Acid proof flooring manufacturer and exporters as a trunky based plants.


FURANE is a two-part chemical setting Furan base mortar used for bonding acid resistant bricks and tiles. It is impermeable in texture and resistant to a very wide range of chemicals, including strong acids alkalis, oils, solvents and unaffected by temperature upto 170 C. FURANE"C" a 100 % carbon filled mortar is available where resistant to Hydrofluoric acid, fluoride salts and strong hot alkalis are required.


FURANE is used for acid resistant bricks and tiles lining where maximum chemical resistance is required e.g. dyestuff, rayon, steel, thermal power stations, fertilizers, petro-chemicals, food-pharmaceuticals industries on locations like floors, drains, tanks, reaction & storage vessels, effluent treatment plants etc.


Color Black
Mix Ratio by wt. Sol to Powder 1.3
Compressive Strength kg/cm2 350
Flexural Strength kg/cm2 75
Bond Strength kg/cm2 10
Water Absorption kg/cm2 1%by wt
Max. Temp. 170 C
Setting Time 18-24 Hrs.


FURANE is prepared by mixing solution & powder to form a workable mortar. The recommended ratio of mixing is 1 part solution to 3 parts powder by wt. The ratio will vary depending upon ambient temperature and working conditions. Use clean, dry mixing pan. Place appropriate quantity of solution in mix pan, and add powder slowly, mixing thoroughly until completely dispersed. Do not mix more material, then can be used within 20-30 minutes.


Ensure that bricks or tiles are clean, dry and stored at ambient temperature. Butter the bricks or tiles with mixed mortar ensuring uniform coverage, with a slight more in the center so no air pockets are formed while its installation. When using as only jointing mortar, it is essential that FURANE is filled to the full depth of the
joint. During and after completion of the application, the area must be kept dry and free from any other materials, which can affect setting and curing of FURANE.


FURANE is recommended to use against very wide range of acids, alkalis, solvents, salts, oils and fats. However FURNAE is not recommended to use against HF, fluoride salts, and strong hot alkalis. For these
conditions, FURANE"C" 100 % carbon filled mortar is available. Also it is not recommended against strong oxidizing acids like chromic acid, Nitric acid and other oxidizing agents.


Always keep solution & powder in cool dry place in sealed container and bag, away from direct sun light, moisture etc. If stored as above, shelf life of solution: 1 year powder: 3-4 months.

° PACKING Solution:

25 kegs and 250 kgs sound quality MS drums. Powder: 37.5 kgs in LDPE+HDPE bags.


It is advisable to wear protective wears at the time of use of FURANE and all other our products. In case of contact with eyes and skin, wash with plenty of water and consult a doctor. This information, given above in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use is beyond our control.
Contact at Works :-
Plot No. 2114, Phase III, G.I.D.C. Estate, Vatva,
Ahmedabad-(India) - 382445.
Call Us :- Works +91-79-25891689
Fax :- +91-79-25830002
E-mail us :- info@acidproofindia.com