Home  |  About Us  |  Products  |  Services  |  FAQ’s  |  Gallery  |  Sitemap  |  Inquiry  |  Contact Us  
 
 
 
 Mortars For Acid Proof Brick /  Tile  /  Mandana Stone  
 Acid Proof Tiles  
 Acid Proof Bricks  
 Acid Proof Lining  
 Acid Proof Flooring  
 Acid Resistant Tiles  
 Acid Resistant Bricks  
 Acid Resistant Lining  
 Acid Resistant Flooring  
 Red Mandana Stone  
 Epoxy Lining  
 Epoxy Flooring  
 Epoxy Coating  
 Water Base Epoxy  
 Glass Flake Filled Lining  
 Glass Flake Lining  
 Glass Flake Coating  
 Grouts  
 Water Proofing  
 Liquid Applied Stainless Steel  316 Coating  
 P.U.Flooring  
 Water Base Polyurethane  
 Polyurethane Wall Coating  
 Polyurethane Flooring  
 Self Leveled Epoxy Flooring  Coating Linings  
 
 
 

 

 

 

  Mortars For Acid Proof Brick /  Tile /  Mandana Stone
 
 
   
EPOXY MORTARS  :-
°
INTRODUCTION:

This is a three parts chemical setting epoxy resin base mortar. It exhibits excellent adhesion to acid resistant bricks/tile, concrete, MS surface. epoxy is resistant to very wide range of chemicals.

°
AREA OF APPLICATION:

Due to very low absorption and very high chemical & physical properties epoxy mortar can be used for acid resisting brick/tile lining, on floors, drains, reaction & storage vessels, sumps, effluent treatment plants of food/pharmaceuticals, Breweries, Dairies, Water treatment plants etc.


° PHYSICAL PROPERTIES:

 Color  Brown
 Mix Ratio by wt. Sol to
 Powder
 1 : 4.5
 Compressive Strength kg/cm2  500
 Flexural Strength kg/cm2  150
 Bond Strength kg/cm2  10
 Water Absorption  1%
 Max. Temp.  85 C
 Setting Time  8-10 Hrs.


°
METHOD OF APPICATION MIXING:

All mixing tools and pan must be clean, dry. Take appropriate quantity of resin and hardener and mix it truly with suitable means, until you get homogeneous mix. Then add powder slowly in it and start mixing slowly to avoid air trapping. The ratio can vary depending upon ambient temperature and working conditions.

°
APPLICATION:

After proper mixing, mortar should be buttered on back and sides of bricks/tiles to be laid. Apply little more mortar and after lying squeeze the excess mortar. If only joints filling are done with epoxy mortar, be sure that full depth of joints is filled with mortar. There should not any air pocket in the joints. During & after completion of the installation, area must be kept dry and free from any other materials, traffic, which can affect setting & curing of epoxy mortar.

°
CHEMICAL RESISTANCE:

Epoxy is highly resistant to acids, alkalis, salts, solvents, greases, detergents etc. However it is not recommended against strong mineral and oxidizing acids.

° STORAGE & SHELF LIFE:

Always keep resin, hardener and powder in cool, dry place, away from direct sunlight and moisture. If stored in sealed containers and bag shelf life of Resin, Harder& Powder will be one year.

° PACKING Solution:

As required by customer.

°
HEALTH & SAFETY:

It is advisable to wear protective wears at the time of use of epoxy and all other our products. In case of contact with eyes and skin, wash with plenty of water and consult a doctor. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.
 
CHEMIPROTECT ENGINEERS
Contact at Works :-
Plot No. 2114, Phase III, G.I.D.C. Estate, Vatva,
Ahmedabad-(India) - 382445.
Call Us :- Works +91-79-25891689
Fax :- +91-79-25830002
E-mail us :- info@acidproofindia.com

chemiprotect@dataone.in

chemiprotect@gmail.com