Home  |  About Us  |  Products  |  Services  |  FAQ’s  |  Gallery  |  Sitemap  |  Inquiry  |  Contact Us  
 Mortars For Acid Proof Brick /  Tile  /  Mandana Stone  
 Acid Proof Tiles  
 Acid Proof Bricks  
 Acid Proof Lining  
 Acid Proof Flooring  
 Acid Resistant Tiles  
 Acid Resistant Bricks  
 Acid Resistant Lining  
 Acid Resistant Flooring  
 Red Mandana Stone  
 Epoxy Lining  
 Epoxy Flooring  
 Epoxy Coating  
 Water Base Epoxy  
 Glass Flake Filled Lining  
 Glass Flake Lining  
 Glass Flake Coating  
 Water Proofing  
 Liquid Applied Stainless Steel  316 Coating  
 Water Base Polyurethane  
 Polyurethane Wall Coating  
 Polyurethane Flooring  
 Self Leveled Epoxy Flooring  Coating Linings  






DESCRIPTION: Epoxy Screed is a solvent free highly filled three parts flooring screed. When applied on concrete surface, it gives a high strength flooring & tank lining, capable to withstand extremly high loading, wear and chemical resistance.

FEATURES: When used as flooring or tank lining screed mortar:

  • Forms seamless surface
  • Very high mechanical strength
  • Excellent chemical resistance
  • Hygienic
  • Dust free surface
  • Hard wearing
  • Anti-slip & anti-skid finish

Epoxy Screed is highly recommended, for use, for factory floor & workshop
Food & pharmaceuticals
Chemical & Engineering.
Textile & Pulp-Paper,
Electronic industries.


Film Thickness 4-5 mm


9-11 kg/cm /M (Approx)
Application Trowel

Curing Initial-6-6-7 Hrs Full 7 days
Finish Gloss
Mixing Ratio As directed on Packing
Colors Grey, Green, Red, Black, White or as required


SURFACE PREPARATION : Successful performance of Epoxy S/L or any other flooring system can achieve only after proper surface preparation. It is the prime requirement, that surface must correctly prepared before application.

  • New concrete or cementations surface must be cured for 28 days.
  • Surface must be free from any oils, grease, loose particles, curing aid chemicals, previously applied coating etc...
  • Surface must be fully dry.
  • For old surface all cracks, cavities should be repaired with Epoxy mortar
  • This is a very thin topping so can not level any irregularities of levels of the original sub-base. Therefore, it is most important to make original surface in line & level, before application of Epoxy Screed


PRIMER COAT: Apply one coat of Epoxy primer on properly prepared surface by brush and allow it to dry.

SCREED APPLICATION: First mix the resin part A, thoroughly with slow speed mixer until uniform color is achieved. Then add curing agent part B and mix again with mixer. After that, add filler par C and mix with mixer until a homogeneous, lumps free mass is achieved.
Then, place the mixed mortar evenly. Temp down with beam laid across steel screeding rails of specific height for desired thickness and finish with steel trowel to get smooth finish.

STORAGE: All the components Resin, Hardener & Filler must be kept in cool, dry place and in covered shed.

HEALTH & SAFETY: It is advisable to wear protective wears at the time of use of Epoxy Screed and all other our products. In case of contact with eyes and skin, wash with plenty of water and consut a doctor.

This information, given above in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use is beyond our control.

Other application : Epoxy flooring, Epoxy coating, Epoxy screeding, Epoxy resin, Epoxy resin rtm, Clear epoxy resin, Epoxy manufacturer resin, Epoxy flooring resin, Counter epoxy resin top, Epoxy resin table top, Adhesive epoxy resin, Epoxy fiberglass resin, Epoxy liquid resin, Epoxy jewelry resin, Casting epoxy resin, Epoxy kit resin, Epoxy laminating lay resin up, Epoxy resin system, Epoxy laminating resin, Epoxy resin top, Epoxy resin sink, Epoxy modified resin, Epoxy marine resin, Epoxy plating resin rose, Bar epoxy resin top, Clear epoxy resin thick, India
Contact at Works :-
Plot No. 2114, Phase III, G.I.D.C. Estate, Vatva,
Ahmedabad-(India) - 382445.
Call Us :- Works +91-79-25891689
Fax :- +91-79-25830002
E-mail us :- info@acidproofindia.com