We Undertake Contracts For Complete Epoxy floorings, Coating, Lining, System for Effluent Treatment Plant, Battery Charging Room, Acid Storage Yard, Neutralize Tank, Neutralizer Tank, Acid Collection Tank, Chemicals Reaction Vessel, Chemicals Storage Vessel, Drainage Systems, Process Floor Area, Auto Cleave vessels, Salphoneter vessels, Isolator vessels, Holding vessels, Nit reactor vessels, Mesuring Tank Etc.
Home  |  About Us  |  Products  |  Services  |  FAQ’s  |  Gallery  |  Sitemap  |  Inquiry  |  Contact Us  
 Mortars For Acid Proof Brick /  Tile  /  Mandana Stone  
 Acid Proof Tiles  
 Acid Proof Bricks  
 Acid Proof Lining  
 Acid Proof Flooring  
 Acid Resistant Tiles  
 Acid Resistant Bricks  
 Acid Resistant Lining  
 Acid Resistant Flooring  
 Red Mandana Stone  
 Epoxy Lining  
 Epoxy Flooring  
 Epoxy Coating  
 Water Base Epoxy  
 Glass Flake Filled Lining  
 Glass Flake Lining  
 Glass Flake Coating  
 Water Proofing  
 Liquid Applied Stainless Steel  316 Coating  
 Water Base Polyurethane  
 Polyurethane Wall Coating  
 Polyurethane Flooring  
 Self Leveled Epoxy Flooring  Coating Linings  




 Epoxy floring, Coatings, Linings, manufacturer and exporters as a trunky based  plants.

EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required.


1) Hard Wearing
2) Non Dusting
3) Excellent Surface Finish
4) Non Smelling
5) Good Aesthetics
6) Highly Chemical Resistant

1.Stir well before mixing Part A and Part B and mix in the prescribed ratio.

2.Apply one coat of EPOXY primer on the clean and dry surface.

3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere.

4.Apply min. 2 coats with the intercoat interval of 6-8 hrs.


 Application  Brush, Roller
 Mixing Ratio  As Directed on Packing
 Pot Life  30 Mins.
 Drying Time  Touch Dry- 30 Min, Hard Dry
 – 6 Hrs.
 Intercoat Interval  6-8 Hrs. Min.
 Dry Film Thickness  125-150 Microns/per coat
 depending on porosity
 Covering Capacity   6-8 sq.met/kg per coat  depending on porosity,  roughness & method of  application.
 Color Shades All Standard Shades


1) Food & Pharmaceutical
2) Work Shop
3) Clean Room Application
4) Chemical Resistant Coating for Concrete& Steel
5) Petrochemical, Fertilizer plants



The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application.

1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry.

2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB)

3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out.


Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor.
Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Contact at Works :-
Plot No. 2114, Phase III, G.I.D.C. Estate, Vatva,
Ahmedabad-(India) - 382445.
Call Us :- Works +91-79-25891689
Fax :- +91-79-25830002
E-mail us :- info@acidproofindia.com