Home  |  About Us  |  Products  |  Services  |  FAQ’s  |  Gallery  |  Sitemap  |  Inquiry  |  Contact Us  
 
 
 
 Mortars For Acid Proof Brick /  Tile  /  Mandana Stone  
 Acid Proof Tiles  
 Acid Proof Bricks  
 Acid Proof Lining  
 Acid Proof Flooring  
 Acid Resistant Tiles  
 Acid Resistant Bricks  
 Acid Resistant Lining  
 Acid Resistant Flooring  
 Red Mandana Stone  
 Epoxy Lining  
 Epoxy Flooring  
 Epoxy Coating  
 Water Base Epoxy  
 Glass Flake Filled Lining  
 Glass Flake Lining  
 Glass Flake Coating  
 Grouts  
 Water Proofing  
 Liquid Applied Stainless Steel  316 Coating  
 P.U.Flooring  
 Water Base Polyurethane  
 Polyurethane Wall Coating  
 Polyurethane Flooring  
 Self Leveled Epoxy Flooring  Coating Linings  
 
 
 

 

 

 

  MORTARS FOR ACID PROOF BRICK / TILE / MANDANA STONE
 
 
MASTIC COMPOUND  :-
°
INTRODUCTION:

Concrete and ordinary redbrick masonry with cement plastered surface are basic methods for construction of floors, foundations, tanks, sumps manholes etc. These can be attacked by corrosive environment, spillage’s of acids and alkalis and other chemicals handled in modern chemical industries. To protect civil structure of plants and buildings from corrosive attack, acid resisting brick lining is most communally used method. Mastic compond is used as an inter-liner with acid resisting brick lining. It can also applied as open mastic flooring for heavy-duty flooring.

° AREA OF APPLICATION :

Mastic compond is mainly used as an impermeable inter-liner with acid resisting brick/tile lining on floors, tanks, drains, sumps. It can also applied, as open mastic flooring where diluted chemicals are to be handled and traffic is not very high.

° PHYSICAL PROPERTIES:

Specific Gravity 2-2.5
Softening Point 130-140C
Recommended Temp. Limit 60 C
Shelf Life Unlimited

°
METHOD OF APPICATION:

Mastic compond application consist of two coats of A.R.Primer primer and followed by Mastic compond in recommended thickness, ranging from min. 12mm to 25mm in one or two layers to achieve desired thickness without any pin hole and crack.

1). Surface preparation and application of A.R.Primer: Refer application method of A.R.Primer.

2). After doing necessary surface preparation and application of primer coating, area to be installed with Mastic compond should be divided in to equal no. bays. To maintain even thickness required, place wooden or aluminum batten. Mastic compond is then broken in small pieces and put it in heating pan. While heating, keep material moving to avoid burning. It is heated until it comes in a uniform consistency and then applied on the surface and works it with wooden float, to achieve uniform thickness and smooth surface free from any pinholes.

°
CHEMICAL RESISTANCE PROPERTIES::

Mastic compond has good resistance to weak, diluted acids, alkalis salts etc. It is not recommended to use against strong acids, oxidizing acid solvents, oil and fats.

°
STORAGE & PACKING:

Keep Mastic compond away from direct sunlight, heat solvents etc. Under this condition, its shelf life is unlimited. It is supplied in cake form and approx. wt. is 10 kgs.

° HEALTH & SAFETY:

Handle melted Mastic compond compound very carefully . Avoid contact with skin. It is advisable to wear protective wears at the time of use of Mastic compond and all other our products. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.

 
CHEMIPROTECT ENGINEERS
Contact at Works :-
Plot No. 2114, Phase III, G.I.D.C. Estate, Vatva,
Ahmedabad-(India) - 382445.
Call Us :- Works +91-79-25891689
Fax :- +91-79-25830002
E-mail us :- info@acidproofindia.com

chemiprotect@dataone.in

chemiprotect@gmail.com