Home  |  About Us  |  Products  |  Services  |  FAQ’s  |  Gallery  |  Sitemap  |  Inquiry  |  Contact Us  
 
 
 
 Mortars For Acid Proof Brick /  Tile  /  Mandana Stone  
 Acid Proof Tiles  
 Acid Proof Bricks  
 Acid Proof Lining  
 Acid Proof Flooring  
 Acid Resistant Tiles  
 Acid Resistant Bricks  
 Acid Resistant Lining  
 Acid Resistant Flooring  
 Red Mandana Stone  
 Epoxy Lining  
 Epoxy Flooring  
 Epoxy Coating  
 Water Base Epoxy  
 Glass Flake Filled Lining  
 Glass Flake Lining  
 Glass Flake Coating  
 Grouts  
 Water Proofing  
 Liquid Applied Stainless Steel  316 Coating  
 P.U.Flooring  
 Water Base Polyurethane  
 Polyurethane Wall Coating  
 Polyurethane Flooring  
 Self Leveled Epoxy Flooring  Coating Linings  
 
 
 

 

 

 

  MORTARS FOR ACID PROOF BRICK / TILE / MANDANA STONE
 
 
PHENOLIC MORTAR  :-
°
INTRODUCTION:

This is a two-pack chemical setting Phenolic base mortar. It is being used as bonding material for acid resisting brick masonry construction for protection against corrosive conditions mainly from acids, in more particular, its resistance to Sulfuric acid upto 70 % is very good.

°
AREA OF APPLICATION:

Phenolic is used for acid resisting brick/tile lining where protection against Sulfuric acid is needed. It is recommended for pickling tank lining, reaction & storage vessels lining, floors, drains lining.

° PHYSICAL PROPERTIES:

Color Black
Mix Ratio by wt. Sol to Powder 1:3
Compressive Strength kg/cm2 150
Flexural Strength kg/cm2 75
Bond Strength kg/cm2 10
Water Absorption 1%
Max. Temp. 150 C
Setting Time In Hours 18-24


°
METHOD OF APPICATION: MIXING

phenolic is prepared by mixing solution & powder to form a workable mortar. The recommended ratio of mixing is 1 part solution to 3 parts powder by wt. The ratio will vary depending upon ambient temperature and working conditions. Use clean, dry mixing pan. Take-out required quantity of solution and add powder to it, slowly and start mixing until you get smooth paste, free from loose powder. Do not prepare more material, then can be used within 20-30 minutes.


°
APPLICATION:

Phenolic mortar is buttered on clean, dry bricks or tiles, which, kept at ambient temperature. Apply little more material on center and place to avoid air pocketing while installation. If only joints are to be filled with phenolic, it is essential that full depth be filled with mortar. During & after completion of the lying of bricks or tiles, the area must be kept dry and free from any other materials and traffic, which can affect setting & curing of phenolic.


°
CHEMICAL RESISTANCE PROPERTIES::

phenolic can provide very good protection against strong mineral acids upto 70 % and oxidizing acids, organic and fatty acids, oil, fats, and many solvents. phenolic " C” 100 % carbon filled mortar is recommended to protect against HF, fluoride salts etc.

°
STORAGE & SAFETY:

Always keep solution& powder in cool dry place in sealed container and bag, away from direct sunlight, moisture. If stored as above and in sealed container at 20 C, shelf life of solution will be 3 months, and powder 6 months.

° PACKING:

Solution: 25 KGS & 225 KGS (net) ingood quality MS drums. Powder: 50 kgs (net) in LDPE+HDPE bags.

° HEALTH & SAFETY:

It is advisable to wear protective wears at the time of use of phenolic and all other our products. In ase of contact with skin & eyes wash with plant, of water and consult a doctor. This information, given above in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.
 
CHEMIPROTECT ENGINEERS
Contact at Works :-
Plot No. 2114, Phase III, G.I.D.C. Estate, Vatva,
Ahmedabad-(India) - 382445.
Call Us :- Works +91-79-25891689
Fax :- +91-79-25830002
E-mail us :- info@acidproofindia.com

chemiprotect@dataone.in

chemiprotect@gmail.com