Home  |  About Us  |  Products  |  Services  |  FAQ’s  |  Gallery  |  Sitemap  |  Inquiry  |  Contact Us  
 
 
 
 Mortars For Acid Proof Brick /  Tile  /  Mandana Stone  
 Acid Proof Tiles  
 Acid Proof Bricks  
 Acid Proof Lining  
 Acid Proof Flooring  
 Acid Resistant Tiles  
 Acid Resistant Bricks  
 Acid Resistant Lining  
 Acid Resistant Flooring  
 Red Mandana Stone  
 Epoxy Lining  
 Epoxy Flooring  
 Epoxy Coating  
 Water Base Epoxy  
 Glass Flake Filled Lining  
 Glass Flake Lining  
 Glass Flake Coating  
 Grouts  
 Water Proofing  
 Liquid Applied Stainless Steel  316 Coating  
 P.U.Flooring  
 Water Base Polyurethane  
 Polyurethane Wall Coating  
 Polyurethane Flooring  
 Self Leveled Epoxy Flooring  Coating Linings  
 
 
 

 

 

 

   EPOXY FLOORING / COATING & SCREEDING
 
 
 
 
     
 
 
SELF LEVEL EPOXY FLOORING :-

DESCRIPTION: Self level epoxy is based on high performance epoxy resin & curing agents. This is a three-component system of resin, curing agent and carefully graded high abrasion/chemical resistant fillers. Product is self-leveling to achieve excellent gloss, attractive, hygienic and very hardwearing & chemical resistant finish.

FEATURES:

  • Being smooth joint less and monolithic surface it is very easy to clean and to make it dust free.
  • Product is based on high performance epoxy resin & curing agent system. The flooring system has excellent overall chemical resistance at ambient temperature.
  • Carefully selected and graded high wearing aggregates give very strong floor toppings to withstand normal foot and light vehicular traffic
  • System is available in many attractive colors.

USES
S/L Epoxy is highly recommended, for use, for extremely hygienic condition, chemical resistant and dust free areas like:
Clean Room
Food Processing Industries
Pharmaceuticals
Electronic Industries
Hospitals etc.

SPECIFICATION

Film Thickness 2-3 mm

Coverage

2.2 to 2.9 kg/cm/m(Approx)
Application Notch Trowel & Spakie Roller
Curing Initial-6-6-7 Hrs Full 7 days
Finish Gloss
Mixing Ratio As directed on Packing
Colors Grey, Green, Red, Black, White or as required

 

SURFACE PREPARATION : Successful performance of S/L Epoxy or any other flooring system can achieve only after proper surface preparation. It is the prime requirement, that surface must correctly prepared before application.

  • New concrete or cementations surface must be cured for 28 days.
  • Surface must be free from any oils, grease, loose particles, curing aid chemicals, previously applied coating etc...
  • Surface must be fully dry.
  • For old surface all cracks, cavities should be repaired with MIPRO-E mortar
  • This is a very thin topping so can not level any irregularities of levels of the original sub-base. Therefore, it is most important to make original surface in line & level, before application of MIPRO-E S/L

APPLICATION

PRIMER COAT: Apply one coat of Epoxy primer on properly prepared surface by brush and allow it to dry.

SELF LEVEL TOPPLING: First mix the resin part A, thoroughly with slow speed mixer until uniform color is achieved. Then add curing agent part B and mix again with mixer. After that, add filler par C and mix with mixer until a homogeneous, lumps free mass is achieved.
Then, pour it on primed surface and work with notched trowel to required thickness and apply spike roller to remove air. Proper mixing is the key factor to get uniform color and smooth surface.

STORAGE: All the components Resin, Hardener & Filler must be kept in cool, dry place and in covered shed.

HEALTH & SAFETY: It is advisable to wear protective wears at the time of use of S/L Epoxy and all other our products. In case of contact with eyes and skin, wash with plenty of water and consut a doctor.

This information, given above in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use is beyond our control.

CHEMIPROTECT ENGINEERS
Contact at Works :-
Plot No. 2114, Phase III, G.I.D.C. Estate, Vatva,
Ahmedabad-(India) - 382445.
Call Us :- Works +91-79-25891689
Fax :- +91-79-25830002
E-mail us :- info@acidproofindia.com

chemiprotect@dataone.in

chemiprotect@gmail.com