MIPRO-ETS is a three-component, towel applied epoxy resin base heavy-duty floor screed system. Can be applied at min. 3mm to max. 10mm thickness, with the help of power trowel or manually depending on thickness as underlayment for a variety of chemicals resistant and hardwearing flooring system. To improve clean ability and chemical resistance, the following top coatings are recommended; MIPRO-EC. MIPRO-EC (HYB), MIPROTHANE-WBC, MIPRO-WBC other coating options are available; please contact us for technical service for specific requirements

Concrete sub-base must be in line, level, properly cured and dried, free from any contaminations like oil, grease or any other chemicals. Concrete or screed substrate should be a minimum of 25N/mm2, free from laitance, dust and other contamination. The substrate should be dry to 75% RH and free from rising damp and ground water.

Quick Inquiry

Provide You The Highest Quality Work